narrow-pitch connectors axc5 ultra compact and super-fine coaxial wire connector with a mated height of 1.5 mm and a terminal pitch of 0.3 mm fine coaxial wire connector features 1. ultra compact a terminal pitch of 0.3 mm allows for a short length and a wired height of only 1.5 mm. 2. highly reliable has strong resistance to adverse environments. stable contact reliability is achieved by applying the expertise we accumulated while developing narrow-pitch connectors for the mobile phone market. 1) our original bellows contact: high resistance to drop impact and twisting forces. 2) v-notch: high resistance to the penetration of foreign matters and ?x. 3) ni barrier: high resistance to solder creep. 4) porosity treatment: resistance to corrosion. 3. zig-zag dil terminals with a 0.6 mm pitch used for the socket, facilitating mounting on the pc board. compared to the 0.4 mm pitch sil layout, a better horizontal weight balance is achieved. furthermore, these terminals offer, (1) better pickup balance on mounting. (2) good solderability due to the 0.6 mm pitch. (3) prevention of solder bridges during re?w soldering. 4. designed for ?e wiring the pulse-heating system allows the use of general-purpose equipment. a shape designed for easy wiring has been adopted, focusing on the operability of ?e wiring. 5. strong resistance to pulling of the ?e wire and reliability of wired portion. the ?e wire is sandwiched between the two gnd bars and soldered. this structure gives better resistance to pulling than caulking. 6. vertical insertion style facilitates connector mating. a vertical mating system featuring a simple locking mechanism and insertion guide facilitates accurate mating. applications devices that have a complex rotating hinge mechanism such as mobile phones, dscs, and dvcs. socket header compliance with rohs directive 0.3mm pitch 17.2 (40 contacts) 1.5 52.5 0.6mm pitch fine coaxial wire: 0.29 mm dia. max. (#42 awg max.) contacts are formed by bending a thin metal sheet. this provides the contact parts with adequate spring characteristics ensuring greater resistance to twisting forces and drop impacts. v-notch by making contact with the edges and thus increasing the contact pressure, this pro- duct can eliminate flux and other foreign matters more effectively than conventional products, which also helps to prevent for- eign matters from obstructing the contact. [cross section of contacts] cross section of the header side contact cross section of the socket side contact patented (japan, korea, and taiwan) ni barrier the exposed nickel-plated portion of the gold-plated contact prevents solder creep despite the ultra low profile of the contact. [contact] note: simultaneous molding of the header contact achieves a construction that prevents solder creep. header post cross section of the socket side contact ni barrier exposed ni portion cu ni au socket contact pinholes ni plating base material porosity treatment film por osity treatment au plating ambient gas this treatment consists in coating the sur- face with a very thin film to seal pinholes in the gold plating. we have developed this porosity treatment technology, which en- sures contact reliability for thin gold plating comparable to that of thick gold plating. improved in mating/unmating durability improved in resistance to corrosion improved in contact reliability for digital signals insertion guide ver tical insertion style holding metal anti-reverse-mating structure (direction-restricted inlet) panasonic-electric-works.net/ac
narrow-pitch connectors axc5 ordering information product types 1. socket note: the standard type comes without positioning bosses. connectors with positioning bosses are available on-demand production. 2. header (set) note: the header removal tool is required for unmating this connector. (see precautions for use.) please contact us for details. mated height no. of contacts pa rt number pac king quantity inner carton (embossed) outer carton 1.5mm 40 axc514022 3, 000 pieces 6, 000 pieces mated height no. of contacts pa rt number pac king quantity inner carton (embossed) outer carton 1.5mm 40 AXC52401 1, 000 pieces 2, 000 pieces 1. socket 2. header (set) 2: with lock function (soldering terminal portion) 5: fine coaxial wire connectors axc 5 1 2 1: socket 1: with positioning boss 2: without positioning boss 5: fine coaxial wire connectors axc 5 2 1 2: header (set) 1: wiring with solder panasonic-electric-works.net/ac
narrow-pitch connectors axc5 specifications 1. characteristics 2. material and surface treatment item speci?ations conditions electrical characteristics rated current 0.3a/terminal (max. 5a at total contacts) maximum current that one contact can conduct. rated voltage 60v ac/dc insulation resistance min. 1, 000 m ? (initial) using 250 v dc megger (applied for 1 minute) breakdown voltage 200 v ac for 1 minute rated voltage is applied for one minute and check for short circuit or damage with a detection current of 1ma. contact resistance max. 90m ? measured based on the milliohmmeter measurement method of jis c 5402 mechanical characteristics composite insertion force max. 50n (40 contacts)(initial) lock strength min. 20n/30 sec. (40 contacts)(initial) contact holding force socket connector: min. 0.49n, socket soldering terminal: min. 0.98n measuring the maximum force. as the contact is axially pull out. wire tensile strength (mated) 5n/30 sec. no breakage at mated part when 40 restrained pins are pulled by at least 0.98 n. environmental characteristics ambient temperature ?5 c to +85 c no freezing at low temperatures storage environment ?5 c to +85 c (product unit) ?0 c to +50 c (embossed packing style) ?0 c to +50 c (tray packing style) no freezing at low temperatures thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m ? , contact resistance max. 25m ? sequence 1. ?5 c, 30 minutes 2. 25 c, max. 5 minutes 3. 85 c, 30 minutes 4. 25 c, max. 5 minutes humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m ? , contact resistance max. 25m ? bath temperature 40 2 c, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m ? , contact resistance max. 25m ? bath temperature 35 2 c, saltwater concentration 5 1% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 25m ? bath temperature 40 2 c, gas concentration 3 1 ppm, humidity 75 to 80% r.h. insertion and removal life mechanical life 30 times, contact resistance max. 25m ? repeated insertion and removal speed of max. 200 times/hours resistance to soldering heat so cket infrared re?w soldering: p eak temperature 260 c max. (surface temperature of pc board adjacent to connector terminals) soldering iron: 350 c for 3 seconds max. 300 c for 5 seconds max. header connected part pulse heat: peak temperature 290 c for 3 seconds max. (heater head must not directly contact connector molded part.) shell retaining part soldering iron: 350 c for 3 seconds max. 300 c for 5 seconds max. pa rt name material surface treatment so cket resin-molding portion lcp resin (ul94v-0), black contact copper alloy contact portion: ni plating on base, au plating on surface (min. 0.1 m) solder portion: ni plating on base, au plating on surface (except for thick of terminal) soldering terminal copper alloy ni plating on base, pd + au ?sh on surface header block resin-molding portion lcp resin (ul94v-0), black post copper alloy contact portion: ni plating on base, au plating on surface (min. 0.1 m) wire soldering terminal: ni plating on base, au plating on surface shell shell stainless steel ni plating on base, pd + au ?sh on surface insulating tape polyimide resin 0 ? 3 + 10 ? 5 + 3 0 + 10 ? 5 panasonic-electric-works.net/ac
narrow-pitch connectors axc5 dimensions (unit: mm) ?header general tolerance: 0.2 ?socket and header are mated general tolerance: 0.2 the cad data of the products with a cad data mark can be downloaded from: http://panasonic-electric-works.net/ac ?socket general tolerance: 0.2 12.6 (suction face) 16.7 17.0 c 0.70 3.6 (0.8)(0.8) soldering terminal 4.20 15.2 0.8 0.1 5.55 0.1 1.0 0.1 0.5 0.1 5.85 0.1 5.85 0.15.55 0.1 0.6 0.05 0.05 0.050.3 0.05 0.80 0.05 5.2 (signal terminal) te rm inal coplanarity (suction face) 0.10 cad data 4.20 4.55 (0.29 dia.) 11.7 0.3 0.40 1.3 cad data 17.0 5.25 1.5 0.15 5.75 min. 4mm 17.2 panasonic-electric-works.net/ac
narrow-pitch connectors axc5 embossed tape dimensions (unit: mm) (common to all sockets and headers) dimensions (unit: mm) product direction with respect to the forwarding direction of the embossed tape precautions for use types no. of contacts a b c d e f quantity per reel socket 4 0 32.0 28.4 14.2 8.0 33.4 380 dia. 3,000 ?speci?ations for taping (in accordance with jis c 0806-1990. however, not applied to the mounting-hole pitch of some connectors.) ?speci?ations for the plastic reel (in accordance with eiajet-7200b.) 1.75 c d a 0.3 4 2 leading direction after packaging b 1.5 dia. +0.1 0 f e 1 top cover tape taping reel embossed carrier tape embossed mounting-hole type direction of tape progress so cket 1. recommended pc board and metal mask patterns sockets are densely mounted with a pitch interval of 0.4 to 0.6 mm. in order to reduce solder bridges and other defects, the solder amount must be controlled and kept at a proper level. refer to the recommended patterns on the right for this purpose. so cket recommended pc board pattern (top view) non-insulated devices prohibited. all devices and solder prohibited. non-insulated solder prohibited. 5.55 0.05 5.85 0.05 1.3 0.115.0 0.1 5.55 0.055.85 0.05 0.6 0.05 1.4 0.05 1.4 0.05 4.5 0.1 3.6 0.05 1.1 0.05 0.4 0.05 0.1 0.05 0.5 0.05 1.8 0.05 6.0 0.1 wire pull-out direction recommended metal mask opening pattern metal mask thickness: when 120 m (terminal opening ratio: 56%) (metal-part opening ratio: 100%) recommended metal mask opening pattern metal mask thickness: when 150 m (terminal opening ratio: 45%) (metal-part opening ratio: 100%) 1.3 0.0215.0 0.05 5.85 0.05 0.6 0.02 0.71 0.02 0.71 0.024.38 0.02 0.5 0.05 1.8 0.02 0.35 0.02 5.55 0.05 5.55 0.05 5.85 0.05 (5.80) 1.3 0.0215.0 0.05 5.85 0.05 0.6 0.02 0.57 0.02 0.57 0.024.66 0.02 0.5 0.05 1.8 0.02 0.35 0.02 5.55 0.05 5.55 0.05 5.85 0.05 (5.80) panasonic-electric-works.net/ac
narrow-pitch connectors axc5 2. safety precautions observe the following safety precautions to prevent accidents and injuries. 1) the use of the connector outside of the speci?d rated current and withstand voltage ranges may cause abnormal heating, smoke, and ?e. never use the connector beyond the speci?d ranges of the product. 2) in order to avoid accidents, make sure you have thoroughly reviewed the speci?ations before use. consult us if you plan to use the product in a way not covered by the speci?ations. 3. precautions for harnessing and header assembly the header of this product is wired by soldering the 0.3 mm pitch cable. if harnessing is desired, then carry it out based on the separately attached ?eader assembly procedures? make sure to get familiar with and observe all the precautions in the procedures. 4. pc board design design the recommended foot pattern in order to secure the mechanical strength in the soldered areas of the terminal. 5. connector mounting in case the connector is picked up by chucking during mounting, an excessive mounter chucking force may deform the molded or metal part of the connector. consult us in advance if chucking is to be applied. 6. soldering 1) manual soldering. ?since this is a low-pro?e product, avoid supplying too much solder when soldering manually. otherwise, solder may creep into the vicinity of the contact portion, or the contact can lose its springing ability. ?make sure that the soldering iron tip is heated within the temperature and time limits indicated in the speci?ations. ?flux from the solder wire may adhere to the contact surfaces during soldering operations. after soldering, carefully check the contact surfaces and clean off any ?x before use. ?be aware that a load applied to the connector terminals while soldering may displace the contact. ?thoroughly clean the iron tip. 2) re?w soldering ?screen-printing is recommended for printing paste solder. ?to determine the relationship between the screen opening area and the pc- board foot pattern area, refer to the diagrams in the recommended patterns for pc boards and metal masks. make sure to use the terminal tip as a reference position when setting. ?consult us when using a screen-printing thickness other than that recommended. ?depending on the size of the connector being used, self alignment may not be possible. accordingly, carefully position the terminal with the pc board pattern. ?the recommended re?w temperature pro?e is given in the ?ure below recommended re?w temperature pro?e (eutectic solder) recommended re?w temperature pro?e (lead-free solder) ?the temperature is measured on the surface of the pc board near the connector terminal. ?when performing re?w soldering on the back of the pc board after re?w soldering the connector, secure the connector using, for example, an adhesive (double re?w soldering on the same side is possible) 3) reworking on a soldered portion ?finish reworking in one operation. ?for reworking of the solder bridge, use a soldering iron with a ?t tip. do not add ?x, otherwise, the ?x may creep to the contact parts. ?use a soldering iron whose tip temperature is within the temperature range speci?d in the speci?ations. 7. prevention of vibration and shock 1) since this product has a particularly low-pro?e, is compact and lightweight, its molded parts are thinned. to prevent the connector from detaching due to vibration and shock, make sure to consider means to avoid applying tension to the connector such as by providing a stopper to ? the connector toward the mating direction or ?ing the wire. 2) do not drop the product or handle it carelessly. otherwise, the terminals may become deformed due to excessive force or the solderability during re?w soldering may degrade. 3) do not insert or remove the connector when it is not soldered. also, forcibly applied external pressure on the terminals can weaken the adherence of the terminals to the molded part or cause the terminals to lose their evenness. 4) excessive twisting during insertion and removal can lead to product damage and separation of the terminals soldered part. an excessive force applied around the mating inlet during mating can also lead to product damage. therefore, be careful when handling the product, and during mating, always align the mating positions and mate in parallel. 5) do not pull the wires when unmating the connector. doing so may damage the product or degrade the locking ability. unmate the connector by referring to the ?ure below. removal of this product requires a header removal tool. please inquire for details. 6) after harnessing, be careful not to apply any excessive stress to the wire roots. 7) keep the pc board warp within 0.03 mm with respect to the total length of the connector. 8) the positioning boss of this product is for rough positioning with the pc board. for accurate positioning when mounting the connector to a pc board, we recommend positioning by an automated machine. 60 to 120 sec. preheating time te mperature peak temperature 180 to 200 c 155 to 165 c 245 c max. within 30 sec. 120 sec. preheating time te mperature peak temperature 200 c 150 to 175 c 260 c max. 70 sec. unmating jig insertion position insert the unmating jig and, with the lock released, lift it directly up. unmating jig shell do not apply any excessive stress to the wire roots. 0.03 mm max. 0.03 mm max. panasonic-electric-works.net/ac
narrow-pitch connectors axc5 9) when cutting or bending the pc board after mounting the connector, be careful that no excessive force is applied to the soldered area. 8. others 1) if you coat the pc board after soldering, so as to prevent degradation of the insulation, make sure that the coating agent does not adhere to the connector. 2) basically, you cannot perform switching with the connector. avoid excessive force on the soldered area. for other details, please verify with the product speci?ation sheets. panasonic-electric-works.net/ac
|
